| Model SRJ-125(100) |
SRJ-125 (100) Roll jet Dryer | |
| The Tahei SRJ-125 Roll jet Dryer dries green veneers peeled by lathe. | ||
| Improvement in veneer thickness uniformity Taihei invented a special device that improves the accuracy of veneer thickness by reducing roll bending. Generally, the feed roll bends because of the weight of the feed roll. Bending creates inconsistencies in the thickness of the veneer with the edges being thinner than at the center. Compared to conventional dryers, Taihei dryers reduce the thickness variation by reducing roll bending. |
||
| Reducing veneer clogging in the dryer By reducing the deflection and bending of the roll, weight is evenly applied to the veneer. Uniform weight distribution creates even veneers that are less likely to warp during the drying process. This also reduces the likelihood of veneer clogging during the drying process. |
||
| Increased yield after drying Reducing the deflection of the roll results in less veneer clogging. Damage to the veneer during the drying process is also minimized as the weight of the feed roll is applied uniformly. Less damage results in a reduction in veneer splits and cracking after drying, resulting in improved veneer yield. Furthermore, improvements in the jointing process after drying can increase yield. |
||
| Reducing installation time Conventional dryers take between 3 to 4 months to install. Taihei dryers are shipped partially pre-assembled which can reduce installation time to as little as 3 weeks. For domestic installations (in-country), we can pre-assemble, deliver and install dryer units. For overseas locations where we have an assembly location, we will ship the parts to the assembly location, assemble the unit, send the dryer to the customer and install it. If the foundation work is completed at the install location, installation can take approximately 3 weeks. |
||
 |
||
| Picture of dryer unit | ||
